Introducing the new eXtreme4s

Dual/Single-Link DVI Video Wall Controller/Splitter
Stand-alone unit
Inputs: DVI/HDMI, Outputs: 4x DVI-D or VGA

The iView eXtreme4s is a stand alone display wall controller that accepts a single(DVI-D or HDMI)
or dual-link DVI input and an flexibly display this across four output monitors.

Each output can be driven as DVI or analog RGB and can represent an arbitrary crop region of the
original input image.  The output resolution and frame rate does not need to be related to that of the
input as the eXtreme4s will optionally upscale and frame rate convert each cropped region independently. 
Additionally, each output can be independently mirrored or rotated through 90°, 180° or 270° to support
creative mixes of landscape and portrait monitors.

• Supports full bezel width and height correction for all types of displays.
• Ideal for use with edge blending projectors - supports image overlapping.
• Splits a single DVI input into four independent monitor outputs.
• Accepts Dual Link DVI, Single Link DVI or HDMI* input.  (*HDMI input requires the optional DVI/HDMI Adapter)
• The input EDID is programmable to allow arbitrary input resolutions and frame rates.
• Flexibly drives four displays, each from any selected region of the input image.
• Supports both DVI and analog RGB output monitors.
• Stand alone operation supports auto-detecting of input resolution and output monitor native resolutions. 
  Output screen configuration is defined by internal non-volatile memory.
• Output configuration is programmable via a USB connection to a PC.  Graphical utility allows easy control
  of cropping, scaling, rotation and gaps.
• Multiple units can be used for larger wall configurations.

Features

Supports creative monitor arrangements

Specification

Crop the input signal into x4 and display x2 quarters landscape and x2 quarters portrait.	Crop the input signal x4 rotate through 90º,180º or 270º, display in landscape and portrait.

Crop the input signal 1920x180 and display in landscape on to individual screens at 1280x1024 each.	Display the complete input on the 1st screen in landscape mode and then crop the input into three segments, rotate and display onto 3 screens in portrait mode

Dual-Link DVI input supports high resolutions

Dual-Link DVI input will support high resolution pixel-perfect source images for display.  The iView eXtreme4s can
additionally present a default native resolution to the source to allow still higher custom resolutions at reduced frame rate,
but still remain within the capabilities of the Dual-Link interface.  Most standard graphics card sources will output at this
native resolution.  Since the eXtreme4s will scale and frame-rate convert, using a triple-buffered capture architecture,
the output monitors can still be driven at their preferred frame rates and resolutions.

 

 

Easily Configurable

 

The eXtreme4s supports simple editing of custom input and output configurations via a USB connection to a PC. 
Once configured, the eXtreme4s will run stand-alone, without the need for the USB connection, and will auto detect
input resolutions and adjust internal scaling appropriately to drive the output monitors in a consistent manner.

Gen-Lock

The eXtreme4s will auto-sense input and output framerates and automatically genlock when possible.  Four identical
monitors will automatically be driven genlocked and if the input timings match they are additionally genlocked and
clock-locked to the source signal.

 

Technical Specifications

Physical Dimensions	235 x175 x 44mm / 9.25" x 6.9" x 1.75"
Operating Temperature Range	0 - 35 DegC / 32 - 96 DegF
Power Requirements	5V DC, 11W.  Universal mains power adapter supplied (100-240V).
Cooling	Cooling by internal fan. The input/output vents should not be restricted.
1x Dual link DVI capture	To 330Mpixels/s.
Input Surface	4k x 4k maximum
4x Single link DVI or analog RGB outputs	To 165Mpixels/s.
Output Screens Resolutions	Up to 2.5Mpixel (maximum 2048 pixels in either direction
Arbitrary Up Scaling	64x original surface area
Software Control	Supports configuration and updates via USB port (USB 2.0)

Download eXtreme4s Datasheet