|
iVw9 Standalone Video Wall Controller |
|
|
|
|
Page 1 of 2 
Ideal for Medical Image Review, Satellite Imagery and Billboard Display SolutionsThe iView Data ultra-high-resolution video controller iVw9 successfully maintains a 8 megapixel input to 8 megapixel output data flow without any image loss. The multiple output design enables large-screen display solutions through only one video controller, providing a cost-effective advantage. The OSD keypad located at the front enables an easy-control interface while all the video outputs and power located at the rear brings the advantage of convenient cabling. The iView video controller is designed to drive LCD, DLP screens, video wall cubes and projectors, making it perfect for all kind of display applications. To buy a large display for advertisement, for example 64 or 84 inches LCD, is too high to afford. A video wall is a group of smaller displays tiled together in a matrix to create one large display. iView provides the controller box that drives the display over multi-screens. Pixel-to-Pixel mapping without any resolution loss The unique iView video wall controller creates a no-resolution-loss image flow through the pixel-to-pixel mapping function. The iVw9 displays 7 megapixel (3072 x 2304) images.
The features of iVw9 video wall controller include: - Fan-less design for any implementation
- iVw9 can operate in 3 (1x3), 4 (2x2) or 9 (3x3) screen mode
- Provide 1 image source input up to 3072 x 2304 DVI Dual-Link and 9 DVI outputs to nine (3x3) monitors
- Display mode choice(Clone, full & vertical replication)
- Software OSD control
- IR Remote Controller
- Enhanced display connection advantage
|
|
The iVw9 video wall controller supports various display modes that include:
- Clone mode (1x1): The iVw9 unit displays the same content on the four screens
- Full mode (3x3): The iVw9 unit divides the input image into nine sections and stretch the 1/9 image to fit
to the selected resolution on each monitor. The full display also support mask enable and disable - Vertical Replication mode (1x3): The iVw9 can project the same image on the top three LCD panels
the Middle three and the bottom three LCD panels. Use only three LCD panels to create a larger display, effectively here the videowall can be split into three physical sections, each being 1x3 installed on opposite walls, or different rooms and all displaying the same information. - Up to 3072 x 2304 pixel input and up to 1024x768 output per display (depending upon display mode in use
can be 1920x1200 for 4 screens).On Screen Display/Remote control functions for selecting; Display mode; Output resolution; Border mask enable/disable and frame wideness adjustment. Bezel mask or screen border adjustment, this is quite an important function, normally the display will be 'staggered" from screen to screen due to the use of conventional LCD/Plasma displays, but with this function you can adjust the display to be seamless, e.g mask-out the screen bezel enabling a visually seamless display.
 - RS-232 communication for remote control (if required)
- Easy-DIY to install and control the videowall or multi-screens, either from a PC, Laptop or remote control.
- Multiple units can be used for larger screen configurations, e.g. by installing a dual channel graphics card
into a PC then two iVw4's can be connected to enable a 6x3 video wall or multi-screen display or one iVw9 can be cascaded to four further units to enable a 16x16 videowall / multiscreens. All iVw controllers can be "mixed & Matched" to enable various display configurations. - Optional Live DVI/VGA video insertion, the iXwRGB (optional purchase) can be installed within the PC
that controls the iVw9, this will enable not only a videowall/multi-screen display with all of Windows applications, but also live video from other sources that provide DVI or VGA outputs, such as Servers, Workstations, Hdmi players, DVI cameras etc..
| Support Various Display Modes: Display Modes Selection : Clone Mode: | Full Mode: | Verticfal Replication Mode: |  |  |  | - Clone mode (1x1): The iVw9 displays the same content on the nine screens. | - Full mode (3x3): The iVw9 divides the input image into sections and stretch the 1/9 image to fit to the selected resolution on each monitor. The full display also support mask enable and disable. | - Vertical Replication mode (1x3): The iVw9 can project the same image on the top three LCD panels and middle and bottom three LCD panels. Customers can require only three LCD panels to create a larger display. |
|